Manual · Volume 2I

Published

Refrigeration Equipment Record

Five independent 24 V Frigoboat refrigeration circuits and their keel-cooled compressor arrangement.

Access level

Public overview

Last reviewed

September 1, 2026

Recorded equipment

The vessel inventory lists five separate 24 V appliances:

  • 141 L Frigoboat MS160IN refrigerator;
  • 112 L Frigoboat MS130IN refrigerator;
  • 60 L Frigoboat GMS80 IN bar refrigerator;
  • 113 L Frigoboat MS110 freezer; and
  • 84 L Frigoboat MS80 under-counter freezer.

Each appliance has its own Milano 12–24 V keel-cooled compressor using R134a refrigerant. Each keel-cooling assembly includes a hull-mounted cooling shoe and sacrificial zinc anode.

Operational implication

Five independent circuits provide useful redundancy, but they also create five separate electrical loads, controls, refrigerant circuits and corrosion-protection points. A failure in one appliance should not be described as loss of the entire refrigeration system without evidence.

Acceptance and maintenance items

  1. Match every cabinet and compressor nameplate to the inventory.
  2. Record normal cabinet temperatures, current draw and cycling behavior.
  3. Identify the keel-cooler and anode for each circuit in the private maintenance plan.
  4. Inspect and replace anodes at a condition-based interval supported by haul-out observations.
  5. Confirm door seals, drains, ventilation and alarm behavior.
  6. Keep refrigerant work and hull penetrations within qualified-service scope.

Controlling evidence

  • Privilege 650 Refrigeration Equipment Inventory — Lucky Enough, derived from the vessel supplier schedule.
  • July 2026 hull-9 configuration/status sheet for the surrounding galley arrangement.

Record limitation

The equipment list is detailed, but final serial numbers, exact compressor locations and commissioning readings remain private and require onboard verification.